Guessing the right price is hard for any planner, and guessing the right asset price doubly hard. If the Fed wants to target inflation, why not target the

Nominal interest rate - real interest rate = expected inflation. So, if the Fed wants to see 2% expected inflation, why not target the

Indeed, beyond a target, the Fed could really nail this down with a flat supply curve. The Fed could nail expected inflation at 2% by offering to exchange, say, any amount of one-year zero coupon treasury bonds for 0.98 one-year zero coupon indexed treasurys (TIPS). And leave \(r^\ast\) and a lot of real rate prognosticating in the dustbin.

Obviously, you worry. If the Fed nails the spread at 2%, will everything else really settle down so that expected inflation is 2%? Or is this like holding the tail and hoping the dog will wag? We need to write down a model.

I just wrote such a model. This is part of the long-running fiscal theory of the price level book project. But it is a short independent point which blog readers may enjoy. And, I'm always nervous that I missed something in wild ideas like this (see the whole Neo-Fisherian business) so I enjoy comments.

I start with a really simple version of the model, \begin{align} x_{t} & =-\sigma\left( i_{t}-E_{t}\pi_{t+1}\right) \label{ISspread}\\ \pi_{t} & =E_{t}\pi_{t+1}+\kappa x_{t}.\label{NKspread}% \end{align} Here I have deleted the \(E_{t}x_{t+1}\) term in the first equation, so it becomes a static IS curve, in which output is lower for a higher real interest rate. This simplification turns out not to matter for the main point, which I verify by going through the same exercise with the full model. But it shows the logic with much less algebra. Denote the real interest rate \begin{equation} r_{t}=i_{t}-E_{t}\pi_{t+1}.\label{rdef}% \end{equation} We can view the spread target as a nominal interest rate rule that reacts to the real interest rate, \begin{equation} i_{t}=\alpha r_{t}+\pi^{e\ast}.\label{iar}% \end{equation} The spread target happens at \(\alpha=1\), but the logic will be clearer and the connection of an interest rate peg and interest spread peg clearer if we allow \(\alpha\in [0,1]\) to connect the possibilities.

Eliminating all variables but inflation from \eqref{ISspread}-\eqref{iar}, we obtain \begin{equation} E_{t}\pi_{t+1}=\frac{1-\alpha}{1-\alpha+\sigma\kappa}\pi_{t}+\frac {\sigma\kappa}{1-\alpha+\sigma\kappa}\pi^{e\ast}.\label{pidynsimple}% \end{equation}

For an interest rate peg, \(\alpha=0\), \(i_{t}=\pi^{e\ast}\), inflation is stable -- the first coefficient is less than one -- but indeterminate.

We complete the model with the government debt valuation equation, in linearized form \begin{equation} \Delta E_{t+1}\pi_{t+1}=-\Delta E_{t+1}\sum_{j=0}^{\infty}\rho^{j}% s_{t+1+j}-\Delta E_{t+1}\sum_{j=0}^{\infty}\rho^{j}r_{t+1+j}% ,\label{fiscalclose}% \end{equation} which determines unexpected inflation. We have a simplified version of the standard new-Keynesian fiscal theory model.

(Targeting the spread rather than the level of interest rates does not hinge on active fiscal vs. active monetary policy. In place of \eqref{fiscalclose}, one could determine unexpected inflation from an active monetary policy rule instead. One writes a threat to let the spread diverge explosively for all but one value of unexpected inflation, in classic new-Keynesian style. In place of \(i_{t}=i_{t}^{\ast }+\phi(\pi_{t}-\pi_{t}^{\ast})\), write \(i_{t}-r_{t}=\pi_{t}^{\ast}+\phi (\pi_{t}-\pi_{t}^{\ast})\), where \(\pi_{t}^{\ast}\) is the full inflation target, i.e. obeying \(\pi_{t}^{e\ast}=E_{t}\pi_{t+1}^{\ast}\) and \(\Delta E_{t+1}\pi_{t+1}^{\ast}\) the desired unexpected inflation. )

If the interest rate target responds to the real rate \(\alpha\in(0,1)\), the model solution has the same character. As \(\alpha\) rises, the dynamics of \eqref{pidynsimple} happen faster, so inflation dynamics behave more and more like the frictionless model, \(\kappa\rightarrow\infty\).

At \(\alpha=1\), the spread target \(i-r=\pi^{\ast}\) nails down expected inflation, as we intuited above. Equation \eqref{pidynsimple} becomes \[ E_{t}\pi_{t+1}=\pi^{e\ast}. \] Equation \eqref{fiscalclose} is unchanged and determines unexpected inflation, though the character of discount rate variation changes.

Inflation is not zero, but it is an unpredictable process, which in some sense is as close as we can get with an expected inflation target. Output and real and nominal rates then follow \begin{align*} x_{t} & =\frac{1}{\kappa}\left( \pi_{t}-\pi^{e\ast}\right) \\ r_{t} & =-\frac{1}{\sigma\kappa}\left( \pi_{t}-\pi^{e\ast}\right) \\ i_{t} & =\pi^{e\ast}-\frac{1}{\sigma\kappa}\left( \pi_{t}-\pi^{e\ast}\right) \end{align*} A fiscal shock here leads to a one-period inflation, and thus a one-period output increase. Higher output means a lower interest rate in the IS curve, and thus a lower nominal interest rate. The real and nominal interest rate vary due to market forces, while the central bank does nothing more than target the spread.

Of course we may wish for a more variable expected inflation target -- many model suggested it is desirable to let a long smooth inflation accommodate a shock. It's easy enough, say, to follow \(\pi_{t}^{e\ast}% =E_{t}\pi_{t+1}=\pi_{t}\) and even have a random walk inflation. Or, \(\pi _{t}^{e\ast}=p^{\ast}-p_{t}\) to implement an expected price level target \(p^{\ast}\) with one-period reversion to that target. Or \(\pi_{t}^{e\ast }=\theta_{\pi}\pi_{t}+\theta_{x}x_{t}\) in Taylor rule tradition. The point is not to defend a constant peg, but that a spread target is possible and will not explode in some unexpected way.

The same behavior occurs in the full new-Keynesian model, which is also the sort of framework one would use to think about the desirability of a spread target. I simultaneously allow shocks to the equations and a time-varying spread target. The model is \begin{align} x_{t} & =E_{t}x_{t+1}-\sigma(i_{t}-E_{t}\pi_{t+1})+v_{xt}\label{xspread}\\ \pi_{t} & =\beta E_{t}\pi_{t+1}+\kappa x_{t}+v_{\pi t}\label{pispread} \end{align} Write the spread target as \[ i_{t}-r_{t}=\pi_{t}^{e\ast}. \] With the definition \[ r_{t}=i_{t}-E_{t}\pi_{t+1}, \] we simply have \[ E_{t}\pi_{t+1}=\pi_{t}^{e\ast}. \] As in the simple model, the spread target directly controls equilibrium expected inflation. Unexpected inflation is set by the same government debt valuation equation \eqref{fiscalclose}. The other variables given inflation and unexpected inflation follow \[ x_{t}=\frac{1}{\kappa}\left( \pi_{t}-\beta\pi_{t}^{e\ast}-v_{\pi t}\right) \] \begin{equation} r_{t}=i_{t}-\pi_{t}^{e\ast}=-\frac{1}{\sigma}\left( \pi_{t}-\pi_{t}^{e\ast }\right) +\frac{\beta}{\sigma}\left( \pi_{t}^{e\ast}-E_{t}\pi_{t+1}^{e\ast }\right) +\frac{1}{\sigma}\left( v_{xt}+v_{\pi t}-E_{t}v_{\pi t+1}\right) \label{rit} \end{equation}

Following inflation, output still has i.i.d. deviations from the spread target, plus Phillips curve shocks. The real rate and nominal interest rate also have only i.i.d. deviations from the spread target, plus both IS\ and Phillips curve shocks. Output is not affected by IS shocks. The endogenous real rate variation \(\sigma r_{t}=v_{xt}\) offsets the IS shock's effect on output in the IS equation \(x_{t}=E_{t}x_{t+1}-\sigma r_{t}+v_{xt}\). This is an instance of desirable real rate variation that the spread target accomplishes automatically. (To obtain \eqref{rit} first-difference \eqref{pispread} and then substitute \(x_{t}-E_{t}x_{t+1}\) from \eqref{xspread}.)

I conclude, it could work. The Fed could target the spread between indexed and non-indexed debt. Doing so would nail down expected inflation. The Fed could then let the level of real and nominal rates float according to market forces. If every other price that has ever been set free is any guide, real and nominal interest rates would float around a lot more than anyone expects.

The result is almost, but not quite, a holy grail of monetary economics. The gold standard has a lot of appeal, as the Fed needs only exchange dollars for gold at a set rate and do no other grand financial central planning. Alas, the value of gold relative to everything else varies too much. We would like something like a CPI standard, which automatically stabilizes the price of everything else in terms of dollars. But the Fed can't buy and sell a basket of the CPI. Indexed bonds (or CPI futures) are nearly the same thing. And here the Fed just trades one year nominal debt for one year real debt. But it's not quite a CPI standard since it only sets expected inflation, not actual inflation. We still need fiscal policy, or new-Keynesian off equilibrium threats, to pick unexpected inflation. Still, guaranteeing that long-sought "anchoring" of expectations seems like a first step.

What else could go wrong? Well, this is just the first simple model, but it's a step. Obviously it depends on the forward looking Phillips curve. So in that sense it may be best as a longer run target and a regime, in which rational expectations and forward looking behavior are good assusmptions, rather than trying to set expected inflation at a daily horizon or try to do something one time that surprises markets.

I would advise the Fed to start paying a lot more attention to the spread. Next, work on increasing the liquidity of indexed debt. Ideally the Treasury should fix debt markets, vastly simplifying TIPS. I've argued for tax free indexed and non-indexed perpetuities, which would be ideal. But the Fed could and should start offering indexed and nominal term financing, for many reasons. If the Fed is going to buy a lot of long-dated Treasurys, it shold issue term liabilities not just floating-rate overnight reserves. Issing term indexed liabilites is a good next step, and there's nothing more liquid than Fed liabilities! Then start gently pushing the spread to where the Fed wants the spread to go. Start buying and selling bonds to push the spread around. Get to the point of a flat supply curve slowly. Heavens, the Fed doesn't trust interest rate targets and QE enough yet to offer a flat supply curve!

I argue for rules of this form in a non-FTPL context in this draft working paper: https://www.tholden.org/assets/files/ARobustMonetaryRule.pdf (cites you of course).

ReplyDeleteThanks for the pointer. To other readers, this is a good paper, analyzing much more detailed models. How it works with more realistic Phillips curves is important, to what extent it allows better behavior given hard to observe underlying shocks is important, just why our intuition that it works for 5 year horizons (the paper) not overnight is important. Paper has a nice treatment of HANK and other current models.

DeleteHow would the Fed deal with the general lack of TIPS liquidity? It seems like this strategy would require a pretty significant change in how Treasury issues debt for there to be enough TIPS to buy.

ReplyDeleteIt also seems like it would work better if Treasury took your advice on underlying debt structure and had a constant coupon perpetuity. It could then issue an inflation-protected version as well and target the spread between the two, with more liquidity.

Indeed. Hence the last paragraph.

DeleteThis is fascinating and I hope you become widely attacked by defenders of older ideas (the alternative is to be ignored, killed by silence). I have no doubt your arguments will prevail, but I sound like a sycophant.

ReplyDeleteWhat might the effect on the model be if the balloon floated in Treasury last autumn to index the basis for long-term capital gains were the tax law?

Is this a different issue since capital gains on bonds are taxed as interest/ordinary rates?

These types of discussions about monetary policy always seem to assume that we have an agreed definition of inflation, that we can measure that inflation and that the definition and measurement are appropriate for monetary policy. Personally I don't think we agree on "inflation" within a factor of about plus minus 1.5% per year - which makes a mockery of most of these discussions and reduces them to just another example of the "first, assume we have a can opener" thinking.

ReplyDeleteThis comment has been removed by the author.

ReplyDeleteJohn,

ReplyDelete"Nominal interest rate - real interest rate = expected inflation. So, if the Fed wants to see 2% expected inflation, why not target the difference between one year TIPS (indexed treasurys) and one year treasurys at 2%? Then expected inflation has to settle down to 2%."

You are presuming that TIPs accurately reflect market expectations of inflation.

Treasury Secretary Jacob Lew changed the rules for TIPs so that they (at maturity) returned full principle + real interest rate if held to maturity (regardless of realized inflation / deflation) - which means that the market rate does not accurately reflect inflation expectations.

As the post explains, TIPS need a lot of improvement before this becomes practical. The Fed could offer indexed reserves directly. Or CPI swaps.

Delete"Ideally the Treasury should fix debt markets, vastly simplifying TIPS. I've argued for tax free indexed and non-indexed perpetuities, which would be ideal."

DeleteHow do perpetual loss indexed securities work from a legal standpoint? An insurance company / hedge fund / whatever buys perpetual TIPs prior to a significant deflation taking place. The principle value of that security can fall below zero - it is perpetual and offers a negative rate of return because inflation is negative.

With equity shares and nominal interest rate bonds, there is a loss limitation. Equity shares can fall to zero but no further. The issuer of the nominal interest rate bond can go bankrupt generating a zero return on the bond.

What you are arguing for is securities that have infinite (perpetual) downside risk.

And this is your ideal?

" If the Fed is going to buy a lot of long-dated Treasurys, it shold issue term liabilities not just floating-rate overnight reserves."

ReplyDeleteThe Fed has the unique power to issue zero coupon perpetuals a/k/a cash.

It has something like 1.3T$ of Benjamins outstanding. What it really needs to do is issue bigger denominations such as $1,000 and $10,000. I think it could easily pick up a couple of T$ of financing that way.

My only concern would be with regards to time-varying inflation risk premia. Changes in TIPS spreads may not reflect inflation expectations even if we fix the problems with taxation and liquidity.

ReplyDelete"Here I have deleted the... ....term in the first equation, so it becomes a static IS curve, in which output is lower for a higher real interest rate."

ReplyDeleteGo to the St. Louis federal reserve (FRED) website and plot a comparison of real interest rate (Ten Year Treasury minus year over year CPI) vs. Real GDP. You will find that generally, they are positively correlated.

The reason the static IS curve is wrong it because it does not factor in equity finance or tax policy.

DeleteNo, the static IS curve is wrong because most people think they will live beyond tomorrow morning so they think about consumption today relative to consumption tomorrow.

Delete"Ideally the Treasury should fix debt markets, vastly simplifying TIPS. I've argued for tax free indexed and non-indexed perpetuities, which would be ideal."

DeleteWho is the buyer that is going to live forever and invest in perpetuities?

Why would this Congress (and future Congress's) commit to interest expenditures on perpetual debt?

They (Congress) are the only body Constitutionally authorized to borrow - not the federal reserve and not the Treasury (Executive Branch).

Re equation (9), as residuals are ~ N(0,1) and TIPS are thinly traded, our traders traded the CME two under ten treasury futures spread in the appropriate ratio. The spread is somewhat robust anticipating recessions and inflation.

ReplyDeleteOdd thought for fun: I don't know if this is feasible, but maybe you know about the MacroModelDatabase https://www.macromodelbase.com/ that John Taylor and others started to try out different mon-policy rules on a collection of models.

ReplyDeleteI never actually used it for that purpose. It turns out they put a bunch of great papers into Dynare and you can access all those programs. So I've used it to help undergrads learn basics of DSGE modeling by just "calibrating" models to other countries by finding new country-specific parameters.

Obviously you can and will code your own model when you get to that point, but I thought it might be fun for blog comments and just getting people talking about targeting the spread. The more people discuss and play with the idea, the better, I hope :-)

Again, I never really tried their database and program for what it's intended, but I believe the latest version let's you enter your own rule beyond (I THINK) just Taylor-type rules, but more elaborate ones as well.

Anyway, just a thought if anyone commenting wants to try or has students interested...

Very interesting idea. However, I see an issue related to liquidity premia. Unless the liquidity of nominal and indexed bonds is exactly the same, the difference in return of the two will be a function of both the relative liquidity premium and expected inflation - liquidity premium in the monetary sense, i.e. how acceptable are these assets in trades or how easy is it to liquidate them quickly. Furthermore, the liquidity premium typically depends on the supply of these assets, so the difference in liquidity premia between a nominal and an indexed bond won't be constant over time.

ReplyDelete